 |
Categories |
 |
|
|
| Let's See What We Have Here |
|
|
| |
Product Name+ |
 |
5 Input Dry Contact Cable (18m length) (only SP2)
An optional feature of the sensorProbe2D is the ability to have up to 5 dry contact inputs per RJ45. This gives a total maximum possible inputs of 10 per sensorProbe2D by utilizing both of the RJ45 sensor ports. These dry-contact ports can be used to monitor any dry-contact inputs, just like the normal autosense dry-contact ports, but, these ports can only be set to operate in the input mode.These additional sensors are labeled as ports 3 to 12. |
| |
5 Input Dry Contact Cable (30m length) (only SP2)
An optional feature of the sensorProbe2D is the ability to have up to 5 dry contact inputs per RJ45. This gives a total maximum possible inputs of 10 per sensorProbe2D by utilizing both of the RJ45 sensor ports. These dry-contact ports can be used to monitor any dry-contact inputs, just like the normal autosense dry-contact ports, but, these ports can only be set to operate in the input mode.These additional sensors are labeled as ports 3 to 12. |
| |
5 Input Dry Contact Cable (4,5m length) (only SP2)
An optional feature of the sensorProbe2D is the ability to have up to 5 dry contact inputs per RJ45. This gives a total maximum possible inputs of 10 per sensorProbe2D by utilizing both of the RJ45 sensor ports. These dry-contact ports can be used to monitor any dry-contact inputs, just like the normal autosense dry-contact ports, but, these ports can only be set to operate in the input mode.These additional sensors are labeled as ports 3 to 12. |
 |
AC Voltage Sensor
The AC Voltage Detector indicates an ALARM/NORMAL condition in software and also via an LED mounted on the sensor. Voltage detectors can detect the presence or the absence of line voltage. It is designed for use worldwide. There is an SNMP interface for getting the alarm/normal status. SNMP traps are sent when critical conditions occur. SNMP polling via 'get' is available to retrieve existing status and configuration parameters. The Web browser interface is also available to display the status and configuration parameters. |
 |
Air Flow Sensor (1,5m length)
The Airflow sensor is placed in the path of the air stream, where the user can monitor the status and the amount of the flowing air. The sensorProbe displays this information using a graphical display via its web interface. In addition to an on/off indication, it also graphs the analog values over a period of time. If, for example, the fan slows down the user will be give an indication of change over time. This may happen if the fan close to failure or the air filter is clogged. |
| Displaying 1 to 5 (of 48 products) |
Result Pages: 1 |
|
|
 |
Quick Find |
|
|
|
Information |
|
|
|
Languages |
|
|
|
