With AKCP`s new DC-Sensor Controlled Relay you can control the electrical power to devices managed over the Internet. This offers new possibilities in energy management.

The DC-Sensor Controlled Relay offers the user easy configuration and integration with the sensorProbe and securityProbe monitoring systems.

Setting up the Sensor Controlled Relay is easy with its built in autosense feature and user friendly web interface.

AKCP`s DC-Sensor Controlled Relay is easily controlled by any of AKCPs intelligent sensors. The relay can provide automatic responses / actions to sensor alerts. This is useful, for example, to switch on DC-based electric equiment. This relay can also be controlled via external computers using the included snmp command line utilities either interactively or programmatically. Furthermore AKCP`s DC Sensor Controlled Relay can be controlled via sensorProbe`s or securityProbe`s web-interface.

The DC-Sensor Controlled Relay includes Metal Oxide Varistors (MOVs) and Snubber circuits to protect the open contacts of the relay from possible high voltage spikes or noise transients. It monitors the power and load and also accepts a control signal which is sent from the sensorProbe or securityProbe monitoring appliances. The DC-Sensor Controlled Relay has a built in fuse that provides protection for the external devices from possible damage due to over voltages or high current.

A simple, point and click web manager can set link the Sensor Controlled Relay to a sensor. When the sensor goes to the chosen state, for example, High Critical, the DC-Sensor Controlled Relay can be set to cycle, which will turn on and then turn off the external DC device for a selected period of time. In this case, when the sensor goes High Critical, the automatic response system will cycle the relay for 20 seconds. Users can easily change the fields in the Relay Settings Menu according to their individual needs using the dropdown list boxes.

The DC-Sensor Controlled Relay with the automatic response feature can give the users more flexibility in responding to possible environmental alerts. Automatic response eliminates the need for the user intervention during alarm conditions.

The status of AKCPs DC-Sensor Controlled Relay is reported by 4 LEDs. Remote monitoring of the status is supported using SNMP traps, web interface, e-mail and SMS.

• DC Sensor Controlled Relay is designed to control DC voltage up to 250V DC
• Operates from a single +5 V DC Power Supply from the sensorProbe or securityProbe
  Protection of open relay contacts against high voltage with Metal Oxide Varistors (MOVs) and snubber circuits
• Status indication with 4 LEDs.
• Up to 2 Sensor Controlled Relays could be attached to sensorProbe2. Up to 8 Sensor Controlled Relays per sensorProbe8, securityProbe 5E or E-sensor8 expansion units.
• AKCP AutoSense feature including disconnect alarm.

• Contact Rated Load is 10A at 30 VDC
• Carry Current 10 Amps Max. Operating Voltage 250 V DC
• Max. Operating Current 10 Amps
• Maximum switching capacity 4,000 VA, 480W with Resistive Load 2,000 VA, 240W with Inductive Load (P.F=0.4) Integrated 10 Amps Fuse 250 VDC
• Power Consumption: Typical 471.00 mWatt, 94.20mA

• Input Voltage: Maximum 250 VDC
• Output Voltage: Maximum 250 VDC
• Dimensions 115 x 80 x 40 mm
• Operating Temperature -40°C to 85°C
• Storage Temperature -40°C to 85°C
• The Sensor Controlled Relay can be extended from the RJ-45 Intelligent Sensor ports on the base units up to 100 feet or 30 meters with standard CAT5/6 cable