Up to 2 dual sensors can be plugged into RJ-45 jacks on the sensorProbe2 and 8 sensors on the sensorProbe8. Each sensor comes with a free CAT 5 cable 5 feet in length. You can connect the sensor using your own CAT 5 cable up to 1000 feet, allowing the sensors to be positioned in hot spots.

When the dual sensor is plugged into the RJ-45 port, the sensorProbe will auto detect the sensor, and it will display Temperature & Humidity for each RJ-45 port. A built in graph option is included on all sensorProbes for graphing temperature and humidity variations over a period of time.

Each sensor has its own SNMP OID so that data can be collected over the network and graphed using external application like MRTG.

The temperature sensor can be read using included SNMP utilities to allow graphing and datalogging at 0.2°C resolution.

• Measurement range Celsius:-40°C to +75°C
• Measurement resolution Celsius: 1°C
• Measurement accuracy Celsius: ±0.2°C accuracy from -40°C to +75°C
• Measurement range Fahrenheit: -40°F to +167°F
• Measurement resolution Fahrenheit: 1°F increments
• Measurement accuracy Fahrenheit: ±0.4°F accuracy from -40°F to +167°F
  
  Humidity
  
• Measurement range: 0 to 100% Relative humidity
• Sensor element wettable without damage
• Resolution: 1%
• Accuracy at 25°C ±3%
• Communications cable: UTP Cat 5 cable.
• Power source: powered by the sensorProbe. No additional power needed.
• Power Consumption: Typical 7.25 mWatt, 1.45mA
• sensorProbe auto detects the presence of the dual sensor
• Up to 2 dual sensors per sensorProbe2, 8 per sensorProbe8 and cameraProbe8.